Conference paper · 2015 · Open access

0213 Wear characteristics of coated carbide tools in the turning of ductile cast iron.

Israel Martínez-Ramírez, Ryutaro Tanaka, Yasuo Yamane, Katsuhiko Sekiya, Keiji Yamada, Tadahiro Ishihara, Satoshi Furuya

Proceedings of International Conference on Leading Edge Manufacturing in 21st century LEM21, 2015.8(0), _0213–1_ · Published 1 January 2015 · DOI 10.1299/jsmelem.2015.8._0213-1_

Open PDFView at the publisherCite this paper

In brief

“0213 Wear characteristics of coated carbide tools in the turning of ductile cast iron.” is a 2015 conference paper by Israel Martínez-Ramírez and 6 co-authors, published in Proceedings of International Conference on Leading Edge Manufacturing in 21st century LEM21. OpenAlex counts 1 citations as of 17 November 2026. It is open access: the full text is free to read at Proceedings of International Conference on Leading Edge Manufacturing in 21st century LEM21.

Citations
1
Most cited in
2017 (1)
Field-weighted impact
0.80
References
11
Authors
7

Abstract

This study reports an extended investigation on the wear, cutting forces and temperature on TiAlN, TiN coated and K15 carbide tool coated and uncoated tungsten carbide tools during the turning of four grades of ductile cast iron. During the machining of low strength grades, the flank wear rate was considerably lower and the steady-state longer, furthermore adhesion was observed on the rake and clearance faces. In the machining of high strength grades, the high wear resistance of the coated TiAlN coated tool caused a steady-state behavior then the flank wear rate change drastically. The K15 carbide tool had the worst performance respecting cutting force and flank wear. Although the cutting forces were similar for both coated tools, the TiAlN coated tool has better performance concerning to flank wear.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Martínez-Ramírez, I., Tanaka, R., Yamane, Y., Sekiya, K., Yamada, K., Ishihara, T., & Furuya, S. (2015). 0213 Wear characteristics of coated carbide tools in the turning of ductile cast iron. Proceedings of International Conference on Leading Edge Manufacturing in 21st century LEM21, 2015.8(0), _0213–1_. https://doi.org/10.1299/jsmelem.2015.8._0213-1_

MLA 9

Martínez-Ramírez, Israel, et al. “0213 Wear characteristics of coated carbide tools in the turning of ductile cast iron.” Proceedings of International Conference on Leading Edge Manufacturing in 21st century LEM21, vol. 2015.8, no. 0, 2015, pp. _0213–1_. https://doi.org/10.1299/jsmelem.2015.8._0213-1_.

Chicago

Martínez-Ramírez, Israel, Ryutaro Tanaka, Yasuo Yamane, Katsuhiko Sekiya, Keiji Yamada, Tadahiro Ishihara, and Satoshi Furuya. 2015. “0213 Wear characteristics of coated carbide tools in the turning of ductile cast iron.” Proceedings of International Conference on Leading Edge Manufacturing in 21st century LEM21 2015.8 (0): _0213–1_. https://doi.org/10.1299/jsmelem.2015.8._0213-1_.

Harvard

Martínez-Ramírez, I. et al. (2015) ‘0213 Wear characteristics of coated carbide tools in the turning of ductile cast iron.’, Proceedings of International Conference on Leading Edge Manufacturing in 21st century LEM21, 2015.8(0), pp. _0213–1_. doi:10.1299/jsmelem.2015.8._0213-1_.

IEEE

I. Martínez-Ramírez et al., “0213 Wear characteristics of coated carbide tools in the turning of ductile cast iron.,” Proceedings of International Conference on Leading Edge Manufacturing in 21st century LEM21, vol. 2015.8, no. 0, pp. _0213–1_, 2015, doi: 10.1299/jsmelem.2015.8._0213-1_.

BibTeX

@inproceedings{martinezramirez2015wear,
  title     = {{0213 Wear characteristics of coated carbide tools in the turning of ductile cast iron.}},
  author    = {Martínez-Ramírez, Israel and Tanaka, Ryutaro and Yamane, Yasuo and Sekiya, Katsuhiko and Yamada, Keiji and Ishihara, Tadahiro and Furuya, Satoshi},
  booktitle = {Proceedings of International Conference on Leading Edge Manufacturing in 21st century LEM21},
  year      = {2015},
  volume    = {2015.8},
  number    = {0},
  pages     = {_0213--1_},
  doi       = {10.1299/jsmelem.2015.8._0213-1_},
  url       = {https://doi.org/10.1299/jsmelem.2015.8._0213-1_}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization

  • ductile iron
  • turning
  • coated carbide tools
  • TiAlN coating
  • TiN coating
  • tungsten carbide
  • cutting force
  • cutting temperature

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Martínez-Ramírez, I., Tanaka, R., Yamane, Y., Sekiya, K., Yamada, K., Ishihara, T., & Furuya, S. (2015). 0213 Wear characteristics of coated carbide tools in the turning of ductile cast iron. Proceedings of International Conference on Leading Edge Manufacturing in 21st century LEM21, 2015.8(0), _0213–1_. https://doi.org/10.1299/jsmelem.2015.8._0213-1_

How many times has this paper been cited?

1 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Proceedings of International Conference on Leading Edge Manufacturing in 21st century LEM21: sign in and open the PDF from this page.

Who wrote this paper?

Israel Martínez-Ramírez, Ryutaro Tanaka, Yasuo Yamane, Katsuhiko Sekiya, Keiji Yamada, Tadahiro Ishihara, Satoshi Furuya.

What is the DOI of this paper?

10.1299/jsmelem.2015.8._0213-1_, permanently at https://doi.org/10.1299/jsmelem.2015.8._0213-1_. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.